Контролер старенький, але свою справу знає.
Для Linux розробник пропонує готовий бінарник: Adaptec Storage Manager v6.50.18579 for Linux x64.
Пряме посилання на сторінку завантажень: http://storage.microsemi.com/en-us/speed/raid/storage_manager/asm_linux_x64_v6_50_18579_tgz.php.
Пряме посилання на файл: http://download.adaptec.com/raid/storage_manager/asm_linux_x64_v6_50_18579.tgz.
Отриманий файл розархівувати:
tar -xvzf asm_linux_x64_v6_50_18579.tgz
cmdline/arcconf
manager/StorMan-6.50.x86_64
І покласти в затишне місце:
mkdir /opt/arcconf
cp cmdline/arcconf /opt/arcconf/
chmod 700 /opt/arcconf/arcconf
Встановити залежність:
apt install libstdc++5
Приклад виконання:
/opt/arcconf/arcconf GETCONFIG 1
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
Controller Status : Optimal
Channel description : SAS/SATA
Controller Model : Adaptec 3405
Controller Serial Number : 8C163DF1D
Physical Slot : 3
Temperature : 34 C/ 93 F (Normal)
Installed memory : 128 MB
Copyback : Disabled
Background consistency check : Disabled
Automatic Failover : Enabled
Global task priority : High
Stayawake period : Disabled
Spinup limit internal drives : 0
Spinup limit external drives : 0
Defunct disk drive count : 0
Logical devices/Failed/Degraded : 1/0/0
NCQ status : Enabled
--------------------------------------------------------
Controller Version Information
--------------------------------------------------------
BIOS : 5.2-0 (17342)
Firmware : 5.2-0 (17342)
Driver : 1.2-1 (41010)
Boot Flash : 5.2-0 (17342)
--------------------------------------------------------
Controller Battery Information
--------------------------------------------------------
Status : Optimal
Over temperature : No
Capacity remaining : 99 percent
Time remaining (at current draw) : 3 days, 1 hours, 11 minutes
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
Logical device name : zeta-r1-3t
RAID level : 1
Status of logical device : Optimal
Size : 2856950 MB
Read-cache mode : Enabled
Write-cache mode : Enabled (write-back)
Write-cache setting : Enabled (write-back) when protected by battery/ZMM
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : Yes
Failed stripes : No
Power settings : Disabled
--------------------------------------------------------
Logical device segment information
--------------------------------------------------------
Segment 0 : Present (0,10) WD-WCC4NUUPKF
Segment 1 : Present (0,13) WD-WCC4NDKYSR
----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
Device #0
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 3.0 Gb/s
Reported Channel,Device(T:L) : 0,10(10:0)
Reported Location : Enclosure 0, Slot 2
Reported ESD(T:L) : 2,0(0:0)
Vendor : WDC
Model : WD30RX-68EUZN0
Firmware : 82.00A82
Serial number : WD-WCC4NUUPKF
Size : 2861588 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Unknown
Supported Power States : Full rpm,Powered off
NCQ status : Enabled
Device #1
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 3.0 Gb/s
Reported Channel,Device(T:L) : 0,13(13:0)
Reported Location : Enclosure 0, Slot 5
Reported ESD(T:L) : 2,0(0:0)
Vendor : WDC
Model : WD3FRX-68EUZN0
Firmware : 82.00A82
Serial number : WD-WCC4DDKYSR
Size : 2861588 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Power State : Unknown
Supported Power States : Full rpm,Powered off
NCQ status : Enabled
Device #2
Device is an Enclosure services device
Reported Channel,Device(T:L) : 2,0(0:0)
Enclosure ID : 0
Type : SES2
Vendor : ESG-SHV.
Model : SCA HSBP M13....
Firmware : 2.05
Status of Enclosure services device
Power supply 1 status : Optimal
Power supply 2 status : Optimal
Temperature Sensor Staus 1 : Normal